Package - Lindr CWP 200 "green line" with beer tower "Thor" in chrome with four beer taps

Package - Lindr CWP 200 "green line" with beer tower "Thor" in chrome with four beer taps

Lindr CWP 200 is a groundbreaking drink cooler for four beer taps, well suited for restaurants and bars with capacity of 120-140L hour. The all-new space-saving design of the cooling unit allows for high performance, low weight, small dimensions and easy service and maintenance.



kr9,371.25
Last items in stock

x 2



kr390.00
In stock

x 24



kr504.00
In stock

x 2



kr128.00
In stock

x 4



kr304.00
In stock

x 4



kr308.00
In stock

x 4



kr2,080.00
In stock

x 2



kr484.00
In stock

x 2



kr366.00
In stock

x 2



kr198.00
In stock

x 4



kr264.00
In stock



kr1,140.00
In stock



kr990.00
In stock



kr38.00
In stock

PACK00013
In stock
kr19,565.25
Tax included 1-3 business days

Pack description

The products in the "green line" series are environmentally friendly and have a 20% higher energy efficiency and 20% lower energy consumption than conventional cooling unit. CWP 200 green line is made exclusively of recyclable materials and without polyurethane insulation.

The package is complete with all hoses, couplings, regulator, etc. needed for a complete installation. Just choose for the keg couplers you wish and a Co2 bottle and machine is complete.

If you would like to make a change to an existing package and, for example, remove or replace a product, it is easy to opt out of a product in the package by clicking on the minus sign in the right corner of the product, the price is updated automatically.

For more information about the included products, read more under the respective product tab.

Pack content

Lindr CWP 200 is a professional beverage cooler for four beverage lines and is suitable for restaurants and bars. This cooler has a performance of 120-140 l/h.

CWP 200 differs from conventional beverage coolers because of its design and quality. Due to its new innovative design, the cooler has high performance, low weight and a less smooth format. The new design makes service and maintenance easy and less time-consuming.

The products in the "green lineseries are environmentally friendly and have a 20% higher energy efficiency and 20% lower energy consumption. The cooler is made exclusively of recyclable materials and without polyurethane insulation.

CWP 200 is a professional beverage cooler with high performance, quality and is easy to install. The overfill protection on the side ensures that the water bath is not overfilled. The materials used meet the highest standards of good hygiene standards, low noise and guarantee a long service life.

Combine with any beer tower from our range and please contact us for help with a complete package.

Technical information

Type Of Refrigerant

R290

Rated Current (a) (A)

4.5

Voltage

220-240V 50Hz ~1

Power consumption (W)

1035

Output (l/h) To 0 ° C / Tk 50 ° C

200

Number of cooling coils

4

Length cooling coil (m)

20/20/10/10

Net weight (kg)

37,5

Volume water bath (l)

20

Diameter cooling coils (mm)

8x0.5

Dimensions (BxDxH mm)

330x421x711

Maximum height difference circulation pump (m)

6

The use of Python hose is important to maintain quality and reduce the risk of foam when serving.

4 x beverage hoses 6.7x9.5 mm (3/8")
2 x cooling water hoses 9.5x12.7x mm (1/2")

Sold per meter. Enter the number of meters you wish to order.

This popular hose type can be used both with our 9.5 mm (3/8") push-fit connections or in the traditional way with hose clamp to connect beverage and propellant. Sold per meter. Enter the number of meters you wish to order.

Suitable accessories with dimension 3/8" can be found under accessories

Suitable for splitting a pipe with drink or propellant on two lines

These couplings are completely interchangeable with couplings from affordable Fluidfit, these can be found under accessories.

This push-fit connection fits with all our keg couplers and beer taps that have 5/8" connections for connecting 8 mm (5/16") hose.

These couplings are completely interchangeable with couplings from affordable Fluidfit, these can be found here.

This push-fit connection fits with all our keg couplers and beer taps that have 5/8" connections for connecting the 9.5 mm (3/8") hose.

These couplings are completely interchangeable with couplings from affordable Fluidfit, these can be found here.

The tap tower is easily mounted on a smooth surface with a center bolt and easily connected to the draft beer cooler with push-fit connections for stainless steel pipes or with Oetikerclamp. Select the appearance by either selecting medallion (2 short and 2 long) or distance. Both cover the tap thread.

Height (mm)395
Dimensions at top (mm)165
Dimensions at the bottom (mm)120
Diameter mounting holes (mm)480
Height to tap spout290
Diameter for installation of beer tap5/8"
Diameter of connections for beverage (mm)8x0.5 (5/16)
Diameter of connections cooling coil (mm)8x0.5 (5/16)
cooling coil in the towerYes
Number of cranes included0 pcs.
Weight (kg)4,7

The tap comes complete with shank, gaskets, spacers and nuts for mounting in a beer tower or directly in a hole with a diameter of 5/8". The beer tap is connected to the beverage line via push-fit connection or traditional connection, read more under accessories.

  • European-made
  • Thread size shank 5/8"
  • Thread length shank 35 mm
  • compensator lever
  • Spring-back handles
  • Interchangeable handles – switch to the type that suits you or why not build your own?
  • Creamer function (provides foam when pushing the handle backwards)
  • Complete with gaskets, spacers and nuts for mounting in wall, sheet metal, etc.

Add push-fit connection for easy connection of hose. A complete list of suitable accessories such as handles, couplings and spare parts can be found under accessories.

The outer and inner diameters of the label washer are 90/82 mm

The outer and inner diameters of the label washer are 90/82 mm

This connection is specially designed for use on pipes as it has a screw to tighten the coupling to the pipe. Used, for example, when connecting drinks on beer tower with 8 mm (5/16") connecting pipes.

These couplings are completely interchangeable with couplings from affordable Fluidfit, these can be found under accessories.

This connection is specially designed for use on pipes as it has a screw to tighten the coupling to the pipe. Used, for example, when connecting drinks on beer tower with 8 mm (5/16") connecting pipes.

These couplings are completely interchangeable with couplings from affordable Fluidfit, these can be found under accessories.

Thread connection Co2: W21.8
Thread outlet: F7/16" UNF
Incoming pressure: 80 bar
Safety valve 7 bar

This controller can be used in conjunction with the so-called Sodastream Co2 bottles if trapezoidal adapter is used

Push-fit Connection with internal 7/16 thread for connecting 9.5 (3/8) mm hose to our regulators, pressure reduction valves and threaded ball couplings to corneliusfat.

These couplings are completely interchangeable with couplings from affordable Fluidfit, these can be found under accessories.

Product added to wishlist

This website uses cookies to give the user increased functionality. Cookies are used for visitor statistics and when using forms.

If you do not accept the use of cookies, you can close the browser or suspend cookies via your browser's security settings.