Package - Lindr AS-40 "green line" with beer tower "Thor" in chrome for two beer taps.
Lindr as-40 "green line" a draft beer cooler for two beer taps suitable for smaller restaurants, bars, guest facilities and also works great for home use. Capacity 30-40 liters of chilled drink per hour.
The products in the "green line" series are environmentally friendly and have a 20% higher energy efficiency and 20% lower energy consumption than conventional cooling unit. The AS-40 green line is made exclusively of recyclable materials and without polyurethane insulation.
The package is complete with all hoses, couplings, regulator, etc. needed for a complete installation. Simply choose for the keg couplers you wish and a Co2 bottle and machine is complete.
If you would like to make a change to an existing package and, for example, remove or replace a product, it is easy to opt out of a product in the package by clicking on the minus sign in the right corner of the product, the price is updated automatically.
For more information about the included products, read more under the respective product tab.
Lindr as-40 "green line" cooling system is suitable for smaller restaurants, bars, guest facilities and also works great for home use. This cooler has a performance of 30-40 l/h.
The circulation pump in the water bath ensures an even temperature, it can also be used for cooling the python hose between as-40 and beer tower. Maximum height difference 1.2 meters. The overfill protection on the side ensures that the water bath is not overfilled.
The products in the "green line" series are environmentally friendly and have a 20% higher energy efficiency and 20% lower energy consumption. The cooler is made exclusively of recyclable materials and without polyurethane insulation.
The materials used meet the highest standards of good hygiene standards and guarantee a long service life. The cooling coils are made of stainless steel. Two handles on the side of the machine make it easy to handle.
Combine with any beer tower from our range and please contact us for help with a complete package.
Technical information
|
Type Of Refrigerant |
R290 |
|
Rated Current (a) (A) |
1.3 |
|
Voltage |
220-240V 50Hz ~1 |
|
Power consumption (W) |
299 |
|
Output (l/h) To 0 ° C / Tk 50 ° C |
40 |
|
Number of cooling coils |
2 |
|
Length cooling coil (m) |
8/8 |
|
Net weight (kg) |
18 |
|
Volume water bath (l) |
14 |
|
Diameter cooling coils (mm) |
8x0.5 |
|
Dimensions (BxDxH mm) |
439x267x394 |
|
Maximum height difference circulation pump (m) |
1,2 |
The tap tower is easily mounted on a smooth surface with a center bolt and easily connected to the draft beer cooler with push-fit connections for stainless steel pipes or with Oetikerclamp. Select the appearance by either selecting medallion or distance. Both cover the tap thread.
| Height (mm) | 395 |
| Dimensions at top (mm) | 90 |
| Dimensions at the bottom (mm) | 110 |
| Diameter mounting holes (mm) | 33 |
| Height to tap spout | 290 |
| Diameter for installation of beer tap | 5/8" |
| Diameter of connections for beverage (mm) | 8x0.5 (5/16) |
| Diameter of connections cooling coil (mm) | 8x0.5 (5/16) |
| cooling coil in the tower | Yes |
| Number of cranes included | 0 pcs. |
| Weight (kg) | 2 |
The outer and inner diameters of the label washer are 90/82 mm
The tap comes complete with shank, gaskets, spacers and nuts for mounting in a beer tower or directly in a hole with a diameter of 5/8". The beer tap is connected to the beverage line via push-fit connection or traditional connection, read more under accessories.
Add push-fit connection for easy connection of hose. A complete list of suitable accessories such as handles, couplings and spare parts can be found under accessories.
These push-fit connections from Fluidfit® can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.
It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.
| Fluidfit | JG | Dmf | ØD1 | ØD2 | ØP1 | ØP2 | L | Weight | Box |
| HUCP 1/4-5/16G | 1/4 | 5/16 | 19,3 | 20 | 41,4 | 96 | 50 | ||
| HUCP 1/4-3/8G | SI030812S | APSUC0604 | 1/4 | 3/8 | 19,3 | 20 | 41,8 | 94 | 50 |
| HUCP 5/16-5/16G | SM040808S | APSUC0505 | 5/16 | 5/16 | 19,3 | 20 | 42,9 | 95 | 50 |
| HUCP 5/16-3/8G | SI041012S | APSUC0605 | 5/16 | 3/8 | 19,3 | 20 | 43,3 | 112 | 50 |
| HUCP 5/16-1/2G | SI41016S | 5/16 | 1/2 | 19,3 | 23,6 | 48,2 | 12 | 50 | |
| HUCP 3/8-5/16G | SI041210S | APSUC0506 | 3/8 | 5/16 | 22,3 | 20 | 45,6 | 114 | 50 |
| HUCP 3/8-3/8G | SI041212S | APSUC0606 | 3/8 | 3/8 | 22,3 | 20 | 46 | 114 | 50 |
The use of Python hose is important to maintain quality and reduce the risk of foam when serving.
2 x beverage hoses 6.7x9.5 mm (3/8")
2 x cooling water hoses 9.5x12.7x mm (1/2")
Sold per meter. Enter the number of meters you wish to order.
These push-fit connections from Fluidfit® can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.
It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.
| Fluidfit | JG | Dmf | ØD1 | ØD2 | B1 | B2 | ØE | L | Weight | Box |
| HUC5/32-5/32G | PM0404S | AUC0101 | 5/32 | 5/32 | 14,7 | 14,7 | 13,2 | 31,8 | 3,8 | 100 |
| HUC3/16-3/16G | PI0406S | AUC0303 | 3/16 | 3/16 | 15,0 | 15,0 | 13,8 | 32,5 | 4,0 | 100 |
| HUC1/4-1/4G | PI0408S | AUC0404 | 1/4 | 1/4 | 16,9 | 16,9 | 15,5 | 36,2 | 5,2 | 100 |
| HUC5/16-5/32G | PM200804S | AUC0501 | 5/16 | 5/32 | 17,5 | 14,7 | 17,6 | 36,6 | 6,5 | 50 |
| HUC5/16-1/4G | PI201008S | AUC0504 | 5/16 | 1/4 | 17,5 | 16,9 | 17,6 | 36,8 | 6,0 | 50 |
| HUC5/16-5/16G | PM0408S | AUC0505 | 5/16 | 5/16 | 17,5 | 17,5 | 17,6 | 38,2 | 6,9 | 50 |
| HUC3/8-1/4G | PI201208S | AUC0604 | 3/8 | 1/4 | 20,2 | 16,9 | 20,0 | 42,1 | 9,9 | 50 |
| HUC3/8-5/16G | PI201210S | AUC0605 | 3/8 | 5/16 | 20,2 | 17,5 | 20,0 | 42,5 | 9,9 | 50 |
| HUC3/8-3/8G | PI0412S | AUC0606 | 3/8 | 3/8 | 20,2 | 20,2 | 20,0 | 42,9 | 9,7 | 50 |
| HUC1/2-5/16G | PI201610S | AUC0705 | 1/2 | 5/16 | 25,1 | 17,5 | 23,6 | 52,0 | 16,7 | 25 |
| HUC1/2-3/8G | PI201612S | AUC0706 | 1/2 | 3/8 | 25,1 | 20,2 | 23,6 | 52,4 | 16,3 | 25 |
| HUC1/2-1/2G | PI0416S | AUC0707 | 1/2 | 1/2 | 25,1 | 25,1 | 23,6 | 53,2 | 14,6 | 25 |
The carbondioxide cartridge can be used with a w21.8x1/14 thread type regulator with a trapezoidal adapter. The great advantage of this type of gas bottle is besides that it is easy to take with it that it can be cheaply and easily replaced to a new one in supermarkets and department stores.
This trapezoidal adapter is the only one in the world that comes with a safety valve hole to minimize the risk of gasket blasting and uncontrolled pressure equalization when disassembling the pressurized Co2 bottle.
The adapter comes with two food-approved gaskets. The flat gasket is made of NBR rubber expands of the Co2 pressure to achieve maximum density. When removing and replacing the Co2 tube, the gasket will swell further, replacing washer with the extra supplied. Let the used gasket rest for a few hours and it regains its original shape and can be used again.
Always use seals of the same type and size to ensure function and safety.
The trapezoidal adapter is supplied with the basic set, which means that the allen screw in the middle is adjusted so that it will open the valve on the 425gr Co2 bottle while the O-ring gasket seals. This may need to be adjusted with the supplied Allen key.
The flat gasket is made of NBR rubber expands of the Co2 pressure to achieve maximum density.
Thread connection Co2: W21.8
Thread outlet: F7/16" UNF
Incoming pressure: 80 bar
Safety valve 7 bar
This controller can be used in conjunction with the so-called Sodastream Co2 bottles if trapezoidal adapter is used
These push-fit connections from Fluidfit® can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.
It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.
|
Fluidfit |
JG |
Dmf |
ØD |
ØP |
T(UNF) |
L |
A |
B |
H |
ØE |
Weight |
Box |
|
HCF5/16-UNF7/16-20G |
AFAUF057/16V |
5/16 |
17,6 |
7/7/16−20 |
30,5 |
9,5 |
17,5 |
17 |
19,0 |
6,5 |
50 |
|
|
HCF3/8-UNF7/16-20G |
AFAUF067/16V |
3/8 |
20,0 |
7/7/16−20 |
33,2 |
9,5 |
20,2 |
17 |
19,0 |
7,5 |
50 |
This popular hose type can be used both with our 8 mm (5/16") push-fit connections or in the traditional way with hose clamp to connect beverage and propellant. Sold per meter. Enter the number of meters you wish to order.
Suitable accessories with dimension 5/16" can be found under accessories.
These push-fit connections from Fluidfit® can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.
It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.
| Fluidfit | JG | Dmf | ØD1 | ØD2 | B1 | B2 | ØP1 | ØP2 | L | J | C | Weight | Box |
| HUY5/32-5/32G | ATWD0101 | 5/32 | 5/32 | 14,7 | 14,7 | 13,8 | 13,8 | 33,7 | 13,5 | 3,3 | 6,7 | 100 | |
| HUY3/16-3/16G | 3/16 | 3/16 | 15,0 | 15,0 | 13,8 | 13,8 | 34,1 | 13,5 | 3,3 | 6,8 | 50 | ||
| HUY1/4-1/4G | PI2308S | ATWD0404 | 1/4 | 1/4 | 16,9 | 16,9 | 15,5 | 15,5 | 38,8 | 15,5 | 3,3 | 8,8 | 50 |
| HUY5/16-5/16G | PM2308S | ATWD0505 | 5/16 | 5/16 | 17,5 | 17,5 | 17,6 | 17,6 | 41,0 | 17,6 | 4,5 | 11,8 | 50 |
| HUY3/8-3/8G | PI2312S | ATWD0606 | 3/8 | 3/8 | 20,2 | 20,2 | 20,0 | 20,0 | 46,4 | 20,0 | 4,5 | 16,7 | 25 |
| HUY1/2-1/2G | PI2316S | ATWD0707 | 1/2 | 1/2 | 25,1 | 25,1 | 23,0 | 23,0 | 56,8 | 23,0 | 4,5 | 25,1 | 20 |
This popular hose type can be used both with our 9.5 mm (3/8") push-fit connections or in the traditional way with hose clamp to connect beverage and propellant. Sold per meter. Enter the number of meters you wish to order.
Suitable accessories with dimension 3/8" can be found under accessories
These push-fit connections from Fluidfit® can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.
It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.
| Fluidfit | JG | Dmf | ØD | ØP | T | L | A | B | H | ØE | Weight | Box |
| HCF1/4-G04G | CI320814S | AFAB0409F-1 | 1/4 | 20,0 | G 1/2 | 37,6 | 12,5 | 16,9 | 27 | 30,0 | 13,9 | 25 |
| HCF1/4-G06G | AFAB0409F | 1/4 | 20,0 | G 3/4 | 34,2 | 6,5 | 16,9 | 36,7 | 41,6 | 36,2 | 20 | |
| HCF5/16-G05G-H | PI451015FS | AFAB0508F | 5/16 | 20,0 | G 5/8 | 34,8 | 9,5 | 17,2 | 36,7 | 30,4 | 10,3 | 25 |
| HCF3/8-G03G | PI451213S | 3/8 | 20,0 | G 3/8 | 37,1 | 9,0 | 20,2 | 24 | 27,3 | 13,9 | 25 | |
| HCF3/8-G04G | PI451214FS | AFAB0607F | 3/8 | 20,0 | G 1/2 | 38,4 | 12,5 | 20,2 | 27 | 30,0 | 13,4 | 25 |
| HCF3/8-G05G | PI451215FS | AFAB0608F | 3/8 | 20,0 | G 5/8 | 38,2 | 13,5 | 20,2 | 29 | 32,0 | 14,8 | 25 |
| HCF3/8-G06G | PI011212S | AFAB0609F-1 | 3/8 | 20,0 | G 3/4 | 37,0 | 10,0 | 20,2 | 36,7 | 41,6 | 39,3 | 20 |
| HCF1/2-G04G | PI451614CS | AFAB0707F | 1/2 | 23,0 | G 1/2 | 41,9 | 12,5 | 25,1 | 27 | 30,0 | 15,5 | 25 |
| HCF3/8-G04G-H | PI451214FS | AFAB0607F | 3/8 | 20 | G 1/2 | 34,2 | 9,0 | 20,2 | 25 | 27,5 | 10,7 | 25 |
| HCF3/8-G05G-H | PI451215FS | AFAB0608F | 3/8 | 20 | G 5/8 | 35,2 | 11,0 | 20,2 | 28 | 30,6 | 13 | 25 |
These push-fit connections from Fluidfit® can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.
It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.
| Fluidfit | JG | Dmf | ØD1 | ØD2 | ØP | A | B | ᵉ | L | Weight | Box |
| HLJ5/32-5/32G | PM220404S | ATEU0101 | 5/32 | 5/32 | 13,2 | 18,0 | 14,7 | 30,1 | 21,9 | 2,5 | 100 |
| HLJ3/16-3/16G | PI220606S | ATEU0303 | 3/16 | 3/16 | 13,8 | 18,5 | 15,0 | 31,4 | 22,5 | 2,9 | 100 |
| HLJ1/4-1/4G | PI220808S | ATEU0404 | 1/4 | 1/4 | 15,5 | 21,0 | 16,9 | 34,8 | 25,1 | 3,7 | 100 |
| HLJ5/16-5/16G | PM220808S | ATEU0505 | 5/16 | 5/16 | 15,5 | 24,8 | 16,9 | 38,6 | 25,1 | 4,5 | 50 |
| HLJ3/8-1/4G | PI221208S | ATEU0406 | 3/8 | 1/4 | 17,6 | 22,5 | 17,5 | 38,3 | 27,7 | 5,4 | 50 |
| HLJ3/8-5/16G | PI221210S | ATEU0506 | 3/8 | 5/16 | 20,0 | 24,8 | 17,5 | 43,2 | 31,0 | 8,1 | 50 |
| HLJ3/8-3/8G | PI221212S | ATEU0606 | 3/8 | 3/8 | 20,0 | 24,8 | 20,2 | 43,2 | 31,4 | 7,9 | 50 |
| HLJ1/2-1/2G | PI221616S | ATEU0707 | 1/2 | 1/2 | 23,6 | 29,5 | 25,1 | 51,2 | 39,2 | 12,7 | 25 |
