Lindr CWP 100 "green line" 3 cooling coils + push-fit connections
Lindr CWP 100 is a groundbreaking drink cooler for three beer taps, well suited for restaurants and bars with capacity of 70-90L hour. The all-new space-saving design of the cooling unit allows for high performance, low weight, small dimensions and easy service and maintenance.
Lindr CWP 100 is a professional beverage cooler for three beverage lines and is suitable for restaurants and bars. This cooler has a performance of 70-90 l/h.
CWP 100 differs from conventional beverage coolers because of its design and quality. Due to its new innovative design, the cooler has high performance, low weight and a less smooth format. The new design makes service and maintenance easy and less time-consuming.
The products in the "green lineseries are environmentally friendly and have a 20% higher energy efficiency and 20% lower energy consumption. The cooler is made exclusively of recyclable materials and without polyurethane insulation.
CWP 100 is a professional beverage cooler with high performance, quality and easy to install. The overfill protection on the side ensures that the water bath is not overfilled. The materials used meet the highest standards of good hygiene standards, low noise and guarantee a long service life.
Combine with any beer tower from our range and please contact us for help with a complete package.
Technical information
Type Of Refrigerant |
R290 |
Rated Current (a) (A) |
2.7 |
Voltage |
220-240V 50Hz ~1 |
Power consumption (W) |
621 |
Output (l/h) To 0 ° C / Tk 50 ° C |
90 |
Number of cooling coils |
3 |
Length cooling coil (m) |
14/14/14 |
Net weight (kg) |
29 |
Volume water bath (l) |
14 |
Diameter cooling coils (mm) |
8x0.5 |
Dimensions (BxDxH mm) |
273x355x706 |
Maximum height difference circulation pump (m) |
6 |
A draught beer cooler or water plant needs to be moved in in the autumn if there is a risk of temperatures below 5 degrees otherwise it risks freezing. If the machine is in a frost-free space, it can remain. It is easy to unplug the machine and move it. If an external tap tower is used, the taps should be unscrewed and the tap tower itself covered with a plastic bag or similar.