Package of carbonated water - Blupura Blusoda Box Fizz 45 with beer tower "Thor" 2 taps for cold and carbonated water
The package of Blupura Soda Box Fizz 45. Choose from two serving options: cold still or carbonated water. Soda Box Fizz 45 is discreetly mounted inside either a kitchen cabinet or office cabinet. A smart, space-saving solution where only the tap is visible.
Pack description
Blupura Soda Box Fizz 45 can be mounted discreetly inside either a kitchen cabinet or office cabinet. A smart, space-saving solution where only the tap is visible. Choose the beer tower that blends best into your environment. add with CO2 from the local gas supplier and you just have to serve.
More information about each product under the product tabs.
- Choose from two serving options: cold still water or carbonated water
- Easy access to internal parts
- Made entirely of stainless steel
- Carborator in steel of the highest quality
- Pump protection system in case of lack of water
Cooling capacity (l/h) |
45 |
Continuous cooling capacity (l) |
12 |
Temperature range cooled water |
5-12° C |
Adjustable Thermostat |
Yes |
Refrigerant |
R290 |
Voltage (V) |
220 V - 50 Hz |
Compressor |
1/5 HP |
Power consumption (W) |
275W - 1.2A |
Net weight (kg) |
31 |
Gross weight (kg) |
34 |
Dimensions (BxDxH mm) |
318 x 440 x 468 |
Possible products to serve with this equipment |
chilled carbonated water, cooled still water |
Water coolers generate heat during operation, this is a fact. The duct on the machine chassis collects and diverts hot air from the water cooler's chassi, to the base of the subcabinet where the machine is mounted. Simple and efficient heat dissipation together with smart space saving.
Pack content
Blupura Blusoda Box Fizz 45 can be mounted discreetly inside either a kitchen cabinet or office cabinet. A smart, space-saving solution where only the tap is visible. Choose the beer tower that blends best into your environment.
- Choose from three serving options: room-temperature water, cold still water or carbonated water
- Easy access to internal parts
- Made entirely of stainless steel
- Carborator in steel of the highest quality
- Pump protection system in case of lack of water
Cooling capacity (l/h) |
45 |
Continuous cooling capacity (l) |
12 |
Temperature range cooled water |
5-12° C |
Adjustable Thermostat |
Yes |
Refrigerant |
R290 |
Voltage (V) |
220 V - 50 Hz |
Compressor |
1/5 HP |
Power consumption (W) |
275W - 1.2A |
Net weight (kg) |
31 |
Gross weight (kg) |
34 |
Dimensions (BxDxH mm) |
318 x 440 x 468 |
Possible products to serve with this equipment |
chilled carbonated water, cooled still water and room-temperature water. |
Water coolers generate heat during operation, this is a fact. The duct on the machine chassis collects and diverts hot air from the water cooler chassi, to the base of the subcabinet where the machine is mounted. Simple but efficient heat dissipation together with smart space saving.
The tap tower is easily mounted on a smooth surface with a center bolt and easily connected to the draft beer cooler with push-fit connections for stainless steel pipes or with Oetikerclamp. Select the appearance by either selecting medallion or distance. Both cover the tap thread.
Height (mm) | 395 |
Dimensions at top (mm) | 90 |
Dimensions at the bottom (mm) | 110 |
Diameter mounting holes (mm) | 33 |
Height to tap spout | 290 |
Diameter for installation of beer tap | 5/8" |
Diameter of connections for beverage (mm) | 8x0.5 (5/16) |
Diameter of connections cooling coil (mm) | 8x0.5 (5/16) |
cooling coil in the tower | Yes |
Number of cranes included | 0 pcs. |
Weight (kg) | 2 |
The tap comes complete with shank, gaskets, spacers and nuts for mounting in a beer tower or directly in a hole with a diameter of 5/8". The beer tap is connected to the beverage line via push-fit connection or traditional connection, read more under accessories.
- European-made
- Made in stainless steel
- Thread size shank 5/8"
- Thread length shank 35 mm
- compensator lever
- Spring-back handles
- Interchangeable handles – switch to the type that suits you or why not build your own?
- Creamer function (provides foam when pushing the handle backwards)
- Complete with gaskets, spacers and nuts for mounting in wall, sheet metal, etc.
Add push-fit connection for easy connection of hose. A complete list of suitable accessories such as handles, couplings and spare parts can be found under accessories.
The outer and inner diameters of the label washer are 90/82 mm
These push-fit connections from Fluidfit® can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.
It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.
Fluidfit | JG | Dmf | ØD1 | ØD2 | ØP1 | ØP2 | L | Weight | Box |
HUCP 1/4-5/16G | 1/4 | 5/16 | 19,3 | 20 | 41,4 | 96 | 50 | ||
HUCP 1/4-3/8G | SI030812S | APSUC0604 | 1/4 | 3/8 | 19,3 | 20 | 41,8 | 94 | 50 |
HUCP 5/16-5/16G | SM040808S | APSUC0505 | 5/16 | 5/16 | 19,3 | 20 | 42,9 | 95 | 50 |
HUCP 5/16-3/8G | SI041012S | APSUC0605 | 5/16 | 3/8 | 19,3 | 20 | 43,3 | 112 | 50 |
HUCP 5/16-1/2G | SI41016S | 5/16 | 1/2 | 19,3 | 23,6 | 48,2 | 12 | 50 | |
HUCP 3/8-5/16G | SI041210S | APSUC0506 | 3/8 | 5/16 | 22,3 | 20 | 45,6 | 114 | 50 |
HUCP 3/8-3/8G | SI041212S | APSUC0606 | 3/8 | 3/8 | 22,3 | 20 | 46 | 114 | 50 |
This popular hose type can be used both with our 8 mm (5/16") push-fit connections or in the traditional way with hose clamp to connect beverage and propellant. Sold per meter. Enter the number of meters you wish to order.
Suitable accessories with dimension 5/16" can be found under accessories.
Turns off the water flow when consumption above the set value. The water fuse should be installed between the tap stand and the connecting hose to the water-connected unit. If leakage in the hose or machine occurs, the water fuse will turn off the inflow when the water passed exceeds the normal consumption of the machine.
The product is supplied including the attachment unit for easy recovery after triggered aqua stop. Installation of this is optional.
Connections 3/4" (input 3/4" female thread, outlet 3/4" male thread.
These couplings can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.
It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.
Fluidfit | JG | Dmf | ØD | T(NH) | ØP | L | A | B | H | ØE | Weight | Box |
HCF1/4-NH06G | 1/4 | 3/4 | 15,5 | 34,2 | 7 | 16,9 | 36,7 | 41,6 | 34,6 | 20 | ||
HCF5/16-NH06G | 5/16 | 3/4 | 20,0 | 36,6 | 7 | 17,5 | 36,7 | 41,6 | 36,5 | 20 | ||
HCF3/8-NH06G | 3/8 | 3/4 | 20,0 | 36,9 | 7 | 20,2 | 36,7 | 41,6 | 37,8 | 20 |
Used together with filter PUC02034 to purify incoming water to our water facilities from Lindr and Blupura.
This water filter has a capacity of 15,000 litres of filtered water. This water filter fits in water filter holder (PUC02035). The filter is easy to install and replace in the filter holder via bayonet mount.
Recommended accessory to ensure an even incoming flow of water for soda machines. Prevents temporary nails in water pressure from triggering the water machine safety valve.
Incoming connections are so-called. push-fit connections with connections 3/8" (9.5mm) manometer 0-6 bar
These push-fit connections from Fluidfit® can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.
It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.
Fluidfit | JG | Dmf | ØD1 | ØD2 | ØP | L | A | B | Weight | Box |
HGJ1/4-5/32G | ARD0104 | 1/4 | 5/32 | 13,2 | 36,7 | 21,0 | 14,7 | 2,4 | 100 | |
HGJ5/16-1/4G | PI061008S | ARD0405 | 5/16 | 1/4 | 15,5 | 40,6 | 22,5 | 16,9 | 3,4 | 100 |
HGJ5/16-5/16 | 5/16 | 5/16 | 17,6 | 41,5 | 22,5 | 17,5 | 4,5 | 50 | ||
HGJ5/16-3/8G | 5/16 | 3/8 | 20,0 | 45,0 | 22,5 | 20,2 | 5,9 | 50 | ||
HGJ3/8-1/4G | PI061208S | ARD0406 | 3/8 | 1/4 | 17,6 | 43,9 | 24,8 | 16,9 | 4,7 | 50 |
HGJ3/8-5/16G | PI061210S | ARD0506 | 3/8 | 5/16 | 17,6 | 44,3 | 24,8 | 17,5 | 4,6 | 50 |
HGJ3/8-1/2G | 3/8 | 1/2 | 23,6 | 52,1 | 24,8 | 25,1 | 4,5 | 50 | ||
HGJ1/2-3/8G | PI061612S | ARD0607 | 1/2 | 3/8 | 20,0 | 51,7 | 29,5 | 20,2 | 7,1 | 50 |
Thread connection Co2: W21.8
Thread outlet: F7/16" UNF
Incoming pressure: 80 bar
Safety valve 7 bar
This controller can be used in conjunction with the so-called Sodastream Co2 bottles if trapezoidal adapter is used
These push-fit connections from Fluidfit® can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.
It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.
Fluidfit |
JG |
Dmf |
ØD |
ØP |
T(UNF) |
L |
A |
B |
H |
ØE |
Weight |
Box |
HCF5/16-UNF7/16-20G |
AFAUF057/16V |
5/16 |
17,6 |
7/7/16−20 |
30,5 |
9,5 |
17,5 |
17 |
19,0 |
6,5 |
50 |
|
HCF3/8-UNF7/16-20G |
AFAUF067/16V |
3/8 |
20,0 |
7/7/16−20 |
33,2 |
9,5 |
20,2 |
17 |
19,0 |
7,5 |
50 |
These push-fit connections from Fluidfit® can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.
It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.
Fluidfit | JG | Dmf | ØD1 | ØD2 | ØP | A | B | ᵉ | L | Weight | Box |
HLJ5/32-5/32G | PM220404S | ATEU0101 | 5/32 | 5/32 | 13,2 | 18,0 | 14,7 | 30,1 | 21,9 | 2,5 | 100 |
HLJ3/16-3/16G | PI220606S | ATEU0303 | 3/16 | 3/16 | 13,8 | 18,5 | 15,0 | 31,4 | 22,5 | 2,9 | 100 |
HLJ1/4-1/4G | PI220808S | ATEU0404 | 1/4 | 1/4 | 15,5 | 21,0 | 16,9 | 34,8 | 25,1 | 3,7 | 100 |
HLJ5/16-5/16G | PM220808S | ATEU0505 | 5/16 | 5/16 | 15,5 | 24,8 | 16,9 | 38,6 | 25,1 | 4,5 | 50 |
HLJ3/8-1/4G | PI221208S | ATEU0406 | 3/8 | 1/4 | 17,6 | 22,5 | 17,5 | 38,3 | 27,7 | 5,4 | 50 |
HLJ3/8-5/16G | PI221210S | ATEU0506 | 3/8 | 5/16 | 20,0 | 24,8 | 17,5 | 43,2 | 31,0 | 8,1 | 50 |
HLJ3/8-3/8G | PI221212S | ATEU0606 | 3/8 | 3/8 | 20,0 | 24,8 | 20,2 | 43,2 | 31,4 | 7,9 | 50 |
HLJ1/2-1/2G | PI221616S | ATEU0707 | 1/2 | 1/2 | 23,6 | 29,5 | 25,1 | 51,2 | 39,2 | 12,7 | 25 |
These push-fit connections from Fluidfit® can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.
It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.
Fluidfit | JG | Dmf | ØD | ØP | L | A | Weight | Box |
HPP5/32G | PM0804S | APL01 | 5/32 | 13,0 | 22,5 | 19,0 | 0,8 | 200 |
HPP3/16G | PI0806S | APL03 | 3/16 | 13,0 | 22,5 | 19,0 | 0,9 | 200 |
HPP1/4G | PI0808S | APL04 | 1/4 | 13,0 | 24,5 | 21,0 | 1,2 | 200 |
HPP5/16G | PM0808S | APL05 | 5/16 | 16,0 | 26,5 | 23,0 | 1,8 | 100 |
HPP3/8G | PI0812S | APL06 | 3/8 | 18,0 | 30,0 | 26,0 | 2,7 | 100 |
HPP1/2G | PI0816S | APL07 | 1/2 | 21,5 | 34,0 | 30,0 | 4,4 | 100 |