Package - Draft beer cooler / Kegerator 50 liters black complete

Complete draft beer cooler with beer tap that holds barrels up to 50 liters. Perfect for home.

Order item

In stock

In stock

In stock

x 2

In stock

In stock

x 4

In stock

Order item
Tax included about 7-10 weekdays

Pack description

Just select til the desired keg coupler so the package complete.

If you would like to make any changes to an existing package to remove or replace a product, it is easy to opt out of a product in the package by clicking on the minus sign in the right corner of the product. If more of any product in the package are desired to change under "number". The price is updated automatically.

For more information about the included products, read more under the respective product tab above.

Pack content

This CE-marked draught beer cooler is the perfect product when a keg is tipped over a longer period of time. A started dish is stored cold for maximum durability. The fridge holds through its arched door barrels of up to 50 liters with diameter of 40 cm or 2 pieces Corneliusfat with diameter 22.5 cm.

The draft beer cooler comes with:

- beer tower, beer tap with compensator lever and drip tray
- Connecting hose 5/8" for beer
- 4 wheels, of which 2 with brake
- Bracket for gas cylinder up to 1.5 kg
- Bushing on back for gas cylinders greater than 1.5 kg
- Rubber base for the keg
- The door can be easily rehung if necessary

Technical specifications:

Color refrigerator


Color beer tower


Width (mm)


Depth (mm)


Height without wheels (mm)


Capacity (l)

Max. 50 ltr.

Gross capacity (l)


Net weight (kg)


Temperature range (°C)


Energy consumption (kWh/24h)


Mains voltage (V/Hz)



R 600a

Climate class


For a complete package add the Co2 package and the desired keg coupler under the accessories tab above.

Thread connection Co2: W21.8
Thread outlet: F7/16" UNF
Incoming pressure: 80 bar
Safety valve 7 bar

This controller can be used in conjunction with the so-called Sodastream Co2 bottles if trapezoidal adapter is used

Agas carbondioxide cartridges are suitable for all carbondioxide machines on the market such as, AQVIA, AGA/Sparkling Water, Wassermax, SodaStream, Soda-Club and Soda-Fresh.

The carbondioxide cartridge can be used with a w21.8x1/14 thread type regulator with a trapezoidal adapter. The great advantage of this type of gas bottle is besides that it is easy to take with it that it can be cheaply and easily replaced to a new one in supermarkets and department stores.

This trapezoidal adapter is the only one in the world that comes with a safety valve hole to minimize the risk of gasket blasting and uncontrolled pressure equalization when disassembling the pressurized Co2 bottle.

The adapter comes with two food-approved gaskets. The flat gasket is made of NBR rubber expands of the Co2 pressure to achieve maximum density. When removing and replacing the Co2 tube, the gasket will swell further, replacing washer with the extra supplied. Let the used gasket rest for a few hours and it regains its original shape and can be used again.

Always use seals of the same type and size to ensure function and safety.

The trapezoidal adapter is supplied with the basic set, which means that the allen screw in the middle is adjusted so that it will open the valve on the 425gr Co2 bottle while the O-ring gasket seals. This may need to be adjusted with the supplied Allen key.

This popular hose type can be used both with our 9.5 mm (3/8") push-fit connections or in the traditional way with hose clamp to connect beverage and propellant. Sold per meter. Enter the number of meters you wish to order.

Suitable accessories with dimension 3/8" can be found under accessories

Fits well with 9.5 mm hose. Easily sealed with hoof tongs.

Product added to wishlist

This website uses cookies to give the user increased functionality. Cookies are used for visitor statistics and when using forms.

If you do not accept the use of cookies, you can close the browser or suspend cookies via your browser's security settings.